Sunday, May 29, 2011

Activacion Pctv Systems

New Work - T TV Spot for Music City Košice

I ran into the path of competition and you could not do me videjko in Adobe After Effect. The whole video is created for the competition T - Mobile Music City Košice, which was commissioned to create a video invitation or user. TV Spot stoup for 1 minute. I hesitated and the moment I started working on the concept of this video.

Thursday, May 26, 2011

Laser Eye Surgery Geode

Masters shuttering

Tuesday with Martin, we had accrued to the swimmers to do handstands fireplace and table. From the concrete. In 3D I suggested a little urval and I vyspekuloval complicated shapes. Will it stand the fireplace, in addition to work tables in other rate and it all durch proper hole for the flue gas from minipiecky for smoking. Nakres unfinished look like this (concrete parts are there already complete):

kozub1 kozub2

Plan was for two days. Sucking and vybetonovat. Small programs narachoval third cubic concrete, what is probably about 6-7 wheelbarrows.

sheeting. Easy to say, harder to do. Underlying concrete panels is not horizontal (intentionally to the terrain, but now I already did it horizontally), so no right angles and everything should be charged and sculpted into an angle. Fortunately I bought last week in Lidl spirit levels set in action:) Two heads - more sense. Martin already Daco like he did here and there threw some kind of griffin. Also of concrete from a higher level to lower nepodtecie what was cool to know the connections table and fireplace. I am, bearing in mind the lessons of physics and uncle Pascal, thought to be poured.

At times we were as ajetaci. We measured slant water level, obtiahli pencil, cut out. When added, we found that it vice versa. Fortunately, it was enough boards from the ceiling. Here and there a man forgets to bleed plates, fine cutting and then sworn. Armature tying Martin, it was him by the hand. I only zavrtaval grossly Roxor into the ground. When the network was finished, I remembered that there must be openings in the flue. So remade to fit there.

It took longer than we thought two days. Last night we triumphantly zavetrili hips wedges and vytesovali to ake it firmly and with a team of tornado or tack.

IMG_3760 IMG_3761
IMG_00853 IMG_00902
IMG_3763 IMG_3764

On Saturday, we started making concrete. Cement I had purchased with a decent margin. After two wheelbarrows showed the tornado with the team, although not move, but concrete is kotuha. Suspect sounds wood roztlacene wall for a few places. It was about an hour pobehali, natlkli lot more props and we hoped to already hold. Wood lamentovalo even further, but already the motion. After a couple of other wheelbarrows showed that the calculations are one thing, but cement has reached. Fortunately mine are building in the village, so I buy a quick lunch, we have finished.

IMG_01013 IMG_01062
IMG_3779 IMG_3783

I hope that when I come next time, not one of them zabedonovanych pile of rubble :) Meanwhile, beyond the jump, or not buy-cheap at the Pole's isolation.

Friday, May 20, 2011

Sologan Of Spicejet Airlines

Paragliding backpack

New Gradient rucksack on paragliding equipment at the exhibition to the National Price for Design.
http://www.sdc.sk/index.php?lang=sk&menu=aktivity_2vystavy

Ostatnia Wieczerza Leonardo Da Vinci Kto Kim Jest

Gradient Mesh Chairs


Mesh Chairs at the show 20 years the Slovak Design Centre
http : / / www.sdc.sk/index.php?lang=sk&menu=aktivity_2vystavy

How Long To Recover From Burst Cyst

Again the Birds

I have already thought of this year we finally the fledging bypass the disaster. Unfortunately it did not. In autumn, we may be stopped, in fact holes in the roof, where nesting and so did the surrounding houses.

IMG_3707

swift actually arrived in early May and have no place to spend the night. Their activity, however, did not reduce. Nalietavaju and still looking for some spot. For us, on the top floor, remained up on the balcony taka joints. Always in her mouth, but some are shallow, because he do not nest in it. I stick them over time to cast out from there. Emergency newcomers spend the night there, they still afford it. Last but at midnight shouting too started doing that I ran to them and I vyduril 7 pieces.

IMG_3704

It would, however, does not, if the skunk were normal. But this year are particularly her raging. What they get up to, it is to attack the abo poldeco. Nalietavaju of the dozens, for we have become accustomed over the years. But they droves to impact on the windows at night. Man gets zradnika, when watching film and Zarzis sharp blow on the balcony windows. Stunning bird sits on the windowsill, lose some pots, oser wall and chair and finally, the motto on the floor and can not fly away. Usually the them I have to help my wife at the proper pistil. And it is happening daily x-times.

IMG_3705

This morning get up and open a window into the sunny day, the fresh air. Before I returned from the toilet, has been an intruder in the bedroom and osral nice white wall.

IMG_3701

They vlietnuti the bottom are always looking for escape. So chaotic vats fly-pass by, then quickly stop and the stress will be considered either on the floor or sill completely immobile. I vymaknem most are already in that state. Opening the windows and scaring them with all tack. It should be taken into their hands and launch out the window. Hm, I envy the neighbors to lower levels, there is no flight paths do not interfere. And I know that winds completely open window I can not. Blanket on the window and clear the air in August.

when I went to lunch, I left the window just to vent slot. After returning, everything was clear to me just what I went in the kitchen and the hallway I saw a bird shit. Oh, great, some asshole is crammed with well over spare and now need to find him. He sat in the nursery on the windowsill and he could still tag and Nini pillows, bed and shirt. Kill it!

IMG_3700 IMG_3699

comforts me just one thing. Mam Shalom theory that they are here only obsmietaju of inertia, young from last year. In the surrounding apartment buildings that were previously insulated, does not fly. In my opinion, this year he made este ramus, but the future already Daju room when there nevyvedu young.

Monday, May 16, 2011

Tiffany Granath Breast Size

Drawing ecological plans

juice now gazebo and fireplace. One of little wooden already behind me and here I just scribble in pencil on rag paper. Majority was in my head. Even so this time I had planned. I have heard many of Zadar program Google SketchUp , but somehow I did not want to go with cannons on rabbits. So I started to draw by hand and calculator in hand. After a few sentences cotangent Golden Verses of Pythagoras, and it ceased to amuse me and I pulled the soft.

took me about 3 hours, until I learned to do with them all yourself. This is an excellent soft, ideal for designs of works and furniture. When a person learn to slide, rotate and change parts, it's great. Automatically knows to show dimensions and other manufacturing srandicky.

Altanok1 Altanok2

And especially with the plugin CutList it generates to the materials I send email straight to the sawmill. For example, my a shelter consumes approximately 1.5 cubic wood, so now I also know what it cost, and that we need more transportation than I planned.

altanok_cutlist

Tables gazebo, I proposed a couple of minutes.

Stol1 Stol2

If you are going to do something of more than 10 fosien, maybe worth considering this great try a small programs. For narocnejsixh is also paying for the version.

Cute Cheap Nose Rings

New Work - Audi TT RS

Hi all

weekend came and I decided to invest time in my novovymodelovanej Audin and create with her nice render inactive. I have made 2 versions of the Audi TT RS in black and white version. Currently working on riggovaní the components that might be inactive nice video. Cross your fingers and we see in other tutorials or poste;).


Wednesday, May 11, 2011

Inurl:multi?cameraframe

week frei

Today kids have everything, though it often does not deserve. So Nina and NASA found itself this week in schools in the country in Jasna. And we finally leave.

Today I was at the cottage with Martin and his father. We arrived here tiles. Rubber hammer and it had enough and on the penultimate Sutri rozsypalo (the picture).

IMG_3682

After vyskarovani it looks quite decently. Este then position the vibration plate and it definitely udupem.

IMG_3686

I bought in Lidl in action welder and father showed me how to use and pozvaral broken swings and engraved.

IMG_3680

trap moles finally worked. But did not catch the mole, but some water vole water. Could not already very well identified. What I read about him, so with all the vermin it's probably the greatest bastard. A That would explain my kapajuce trees and shrubs. Well, this catches me happier.

IMG_3685

Friday, May 6, 2011

How To Masterbate Clitical

Kamenny Tetris

Altankova odyssey continues. S Martin found us two days to lay flagstones. No joke. It can play Tetris and find pieces that fit together, podsypat the gravel and made it plain. This combination is particularly demanding when it is realized that such sutras is not less than 10 kg. And when does not fit, so they should try a few, before it can be. Mat-in which a plane is another joy. On the first section we are able smaller hump, but further it was quite OK. Perfectly straight it will never be, the stones do not have equal size and each has a different thickness.

piplacka that this is demonstrated by our growth. For two days we managed to Take 3 / 4. The inauguration of unfinished but at least we naskladali rough draft, so it is "already" there just tenderize. Yesterday we went there early missionaries from the cold. At night it was below zero. Morning snowing, the sun showed up when we left home. My hands from freezing and drawn in fajne spuchli. But in the evening for football is quite successful, I probably scored the most goals and we won. Not that I wanted to extol, but for me it's such a rarity that I have to mention it:)

Altánok, dlažba Altánok, dlažba
Altánok, dlažba Altánok, dlažba
Altánok, dlažba Altánok, dlažba
Altánok, dlažba Altánok, dlažba

And now to comfort me and Towercom. Launched in Presov both terrestrial multiplexes, causing me to extend the range of 7 stations and during the championships and STV1 in HD. I just dopozeral Finland, Germany and is due to the difference in the picture. Well, I hope to have our Guild as well enjoy the evening.

Monday, May 2, 2011

Where Is Cosmonde Located In China

3ds Max 2012 news - Iray

ago, the company announced a new version of Autodesk 3ds Max 2012 . 3ds Max was again from the previous version enriched with several new features. One of them is integrated with Iray rendering system which contributed to the riverbed by Mental Images.


Iray is integrated rendering tool for creating photo-realistic images. His main priority is to get rid of 3D graphics rendering lengthy setup. Iray do this for you and try to mimic as closely as possible during render physically accurate calculation. Iray used to calculate the standard picture your CPU with the support of more core processors with supporting Hyper-Threading. Since recently starting to render all systems also support rendering using graphics cards as Iray in this lag. Supports NVIDIA CUDA which, using CUDA GPU acceleration units can significantly speed up rendering time. There is talk of it as another milestone rendering revolution because Iray provides photorealistic results within one click. Or so I decided to try on my own and Iray undergo several tests.

the scene


On behalf Iray undergo the test, I invested time and I prepared a simple interior scene with a single bed, table and image that I nasvetľoval ONLY by system Daylight . As the sunlight I used mr Sun and Sky (indirect light) I used mr Sky. Daylight system so I headed to my shedding light on my stage right through interior windows.


materials for the interior I used to actually Shader ArchDesign defined parameters and textures.


The material is suspended because we must recognize the fact that Iray cooperated with all the shaders and maps. Iray cooperates well with Shader ArchDesign or in addition to Autodesk Autodesk Material Metallic Paint and also with Shader Multi Sub-Object material. While working with shaders ArchDesign but supports all its features or settings. Iray Ignore Reflection - Glossy Samples, Fast (Interpol) and Highlights + FG Only. The same applies for thus setting refraction refraction.

Iray also ignores effects such as ambient occlusion and Round Corners (rounded corners), advanced settings acceleration calculations reflectance (Fast Glossy Interpolation rollout) or advanced settings Rendering (Advanced Rendering Options rollout) except Refraction - Max Distance and Color At Max Distance and Advanced Options Transparency - Glass / translucency Treat As Objects and Back Face Culling and finally in the Maps tab, Special Purpose ignores the option Do Not Apply To The Bumps Diffuse Shading.

us remains as the last set exposure. Since Iray supports only mr Photographic Exposure Control was left me nothing but use it and set parameters.



scene we should be finished and we can get down to testing.

Testing

Since Iray develops the same company which is involved in 3ds Max's on Mental Ray and are closely interlinked, rendering these systems, I could not try the same scene, with the same settings of light, the same materiálmy, will render the image without inactive major interventions The Rendering Buttons, and compare the visual results that would in case of success Iray pointing to its great capacity for which it was designed.

Mental ray


So I decided to turn the Mental Ray rendering and I set the minimal and FG Bounces I set to 2 so that the scene was dark and was see the result of inactive and FG Precision Presets I set to Medium. The material was left Sampless value defaults to 8 and have never been used Ambient Occlusion effect.

Mental Ray - 11 minutes / FG Precision Presets for medium and FG Bounces: 2

resulting render is to render on my Intel Core i3 - 4 computational threads 960x540 resolution at 11 minutes. Fared quite well up to that would be necessary to improve the quality of the calculations of reflection and illumination of the solution or part lighten picture - these are just steps to iray has been developed.

Iray


Iray render us with only two tabs rendering settings. The first is well known and Common Renderer second tab which is only render Iray. There are two card setup and it is iray and Advanced Parameters. The card iray we can set the duration of the calculation - that indicate precisely Možme hours, minutes and seconds. In Iterations (number of passes): We can set you takzv. number of passes. Finally, the Unlimited option whereby we will render image unless we stop manual rendering.

second tab gives us options as Trace / Bounce Limits in which we can set the limits of light reflectivity. Physically Correct Choice (Unlimited) - The light will be reflected fully in the picture rendering. The last option Maximum Number of Light Bounces you how much we can preset the reflections enable the rendering.
last group setting is Image Filtering (Antialiasing) is the smoothing of the image, Displacement (Global Setting) - Možme globally set deformation maps and the last Material Override option where all materials rewrite one scene created material.

Since render in Mental Ray lasted for 11 minutes so I decided to render in Iray will take equally long for results comparison. Iray I set the Advanced Parameters tab - Trace / Bounce limits for physically correct results. Other additional settings which are used in mental ray as the quality of shadows, refraction, reflection or inactive number posted rays for the calculation of indirect lighting carry Iray available because it is perfect to do it all for us.

Iray 11 minutes / set the default rendering

resulting render up to the noise that is caused by lack of long render fared well. You can be noted that reflections on the wooden floor are quite good and fine - or do not appear on the walls of the black areas. We achieved this result without inactive adjustment which would render in Mental Ray, we had to go but Iray that saved us from a "set" it for us.

for better quality and still render would be left longer render the image. I had this image render further 9 and a half hours and the final render you can see:

Iray - 9 am. 30min. / Default setting

result is nice photorealistic , post-production piece of the bitmap editor such as Adobe Photoshop or Gimp which is free, and the render is finished.


Conclusion testing rendering interior

This testing compared with mental ray and iray we found that in iray without rendering any settings we can get a nice photo-realistic result but at that time needed to achieve a nice render inactive without a sharp noise must be longer.

Self Illumination

And as for that object samoosvetlovaci self illumination?

I decided to also try. On the table we have in our scene, I can create a new primitive object - teapot. I prepared his material with feature Arch Design Self Illumination (Glow) where I group Luminance unitless parameter set to value 100 000 Glow in the group parameter options I turned Illuminates the scene (when using FG) which allows us to illuminate the scene object with this material.


Mental Ray

For comparison, I am prepared to render mental ray rendering default value. Again, I just increased FG Bounces to 2 and Final Gather for Precision medium.

Mental Ray - 8 minutes / FG Precision Presets for medium and FG Bounces 2
As we can see with the Mental Ray rendering with the default IP self illumination is not very good advice. Would a big hit to set render to Rendered image was visually friendly.

Iray


Iray render I set rendering to 8 minutes. Settings I say let's default Trace / Bounce Limits with checked option Physically Correct (Unlimited).

Iray - 8 minutes / default rendering settings
Iray in this case tinker much with the light and shade, and our interior nicely lighted the teapot object. The only thing missing for the perfect result is higher quality output to render - render.

Conclusion

The resulting comparison with Mental Ray and Iray I wanted to prove what is easy to get to fine render inactive without setting up complex rendering.

Iray is really great rendering tool for creating photo-realistic images. Puts to the fore the emphasis on simplicity and a minimalist rendering settings. However, its disadvantage is that if you do not have under the hood, core i7 intel xtreme graphics card or such. NVIDIA QUADRO thus rendering may take considerably longer.